Release Agents

ONE-OFF APPLICATION

Dispersion for cleaning and permanent coating & lubrication
Based on: phosphoric acid with functional additives
Free from modified polysiloxanes and siloxanes
Free from mineral oil and graphite
For die casting dies and squeeze casting dies
Suitable for Al, Mg and Zn alloys
Application: by spraying or brushing

APPLICATION BEFORE EACH SHOT

HA Trennstoff FTw (01…29)

  • Water-miscible mould release agent (emulsion), dilutable up to 0.5%
  • Based on: synthetic oils, wax, high-temperature and anti-corrosion additives
      - modified polysiloxanes or siloxane-free
      - free from mineral oil and graphite
  • For die casting dies, applicable with die temperatures >120°C 
  • Suitable for Al, Mg and Zn alloys
  • Application: with spray system or manual spray units

 

HA Trennsol® FTw (01…29) 

  • Water-miscible mould release agent (emulsion), dilutable up to 0.5%
  • Based on: synthetic oils, wax, high-temperature and anti-corrosion additives
      - Free from silicone, mineral oil and graphite
      - Nano-composite
  • For die casting dies, applicable with die temperatures >120°C
  • Suitable for Al, Mg and Zn alloys
  • Application: with spray system or manual spray units

 

HA Trennstoff FTf (40…49)

  • Ready-to-use mould release agent (solution), dilutable with “HA Trennstoff FTf 44”
  • Based on: synthetic oils, mineral oil with functional additives
      - Free from silicone and graphite
  • For die casting dies, applicable with die temperatures <120°C 
  • Suitable for Pb, Sn and Zn alloys
  • Application: with spray system or manual spray units

 

HA Trennsol® FTs (50…59) 

  • Ready-to-use mould release agent (granules)
  • Based on: waxes, functional additives
      - Free from silicone, mineral oil and graphite
      - With or without nano-composites
  • For die casting dies
  • Suitable for Al, Mg and Zn alloys
  • Application: with HA Trennsol® TV system

 

HA Kokillenschlichte KS 84

  • Water-miscible mould release agent (dispersion), dilutable up to 20%
  • Based on: boron nitride
      - modified polysiloxanes, or free from siloxane
      - Free from mineral oil and graphite 
  • For squeeze casting dies, applicable with die temperatures >160°C 
  • Suitable for Al alloys
  • Application: with spray system or manual spray units

Contact

Please contact our product management team for detailed information on our release agents:

Tel:     +49 211 5087 -213 / -214 

Fax:    +49 211 50 77 57

E-Mail: pm@huettenes-albertus.com